|Description||Viking Juice is an advanced chain lube designed to work well in wet and dry conditions.
It will remain in the chain for a much longer period than conventional lubes, increasing chain life.
Singletrack Magazine tested it for 400 miles of tough as nails Scottish XC and came away praising it as quite possibly âthe holy grail of chain lubesâ.
Un-screw nozzle and pierce security seal.
Re-attach nozzle and open flow valve a small amount to avoid over application.
Viking Juice is very runny, so take care not to open the valve too much otherwise it will end up on the floor!
For top performance, chain must be thoroughly degreased
Apply up to 4 layers of Viking Juice , allowing at least 2 minutes between each layer for the lube to penetrate and âset-upâ correctly.
Ideally you would apply Viking Juice after you have cleaned your bike having finished a ride.
This would give the chain lube the maximum amount of time to set up properly giving maximum performance on your next ride and stopping any corrosion occurring in the meantime.
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying.